Inrotech-Senslogic
Inrotech-SensLogic®
Intelligent welding technology
Inrotech-SensLogic® is a unique, well proven technology which initially was developed in the period 2008 to 2010. Proving its functionality successfully in various shipyards around the world, it has constantly been improved over the years ever since and represents today a unique technology platform with an unmatched simplicity and user friendliness. The technology works on a combination of scanning, sensing and a logic, which makes it able to identify the object to be welded automatically, as long as the design is based on design rules.
No programming, no transfer of cad-drawing
Shipbuilding technology
Why choose Inrotech-SensLogic® technology?
After the scanning sequence is completed, the Inrotech-Inrotech-SensLogic® Technology takes over. As the 3D topography has now provided rough information about all stiffener/profile positions, the system only needs to search within a very small window to identify the size and type of the profiles/stiffenerand the exact location of each profile/stiffener including end points. This saves a lot of sensing time.
Choose Inrotech if:
- You are welding large steel structure, in your workshop or on construction sites
- Want to robotize your welding jobs, but not to employ robot engineers
- If lack of qualified welders is a problem for you
- Want to improve welding quality
- Want to speed up cycle time
- Need welding robots to fit into your existing production lay-out
- Are looking for a trustworthy partner and not only merely a supplier
- Want to improve your bottom line
Check out the benefits of Inrotech-SensLogic® Technology
High level of automation
The main advantage of the technology compared to other systems, which partly or fully are based on off-line programming, is that the operation runs fully automatic: No programming, No transfer of CAD-drawings, No back-end engineers required, simple green/red button simplicity, green for start, red for stop.
Simple operation
It is not necessary to place the robots or the workpiece in accurate positions, as the robot find out by itself. Once the set-up is prepared, the operator more or less just have to push the green “Start” button. Our philosophy is: a welding robot should not be any more complicated to use than a dishwasher.
Process
At our Gantry applications such as Inrotech-MicroTwin there is a combination high quality precision scanning with the SensLogic thus giving further autonomy to the recognition of profiles itself. The scanning process is fast, at a speed of 6m per minute over the full width of the gantry where this advanced technology is provided.